Nearly two-thirds of chemical companies responding to an Accenture survey said their companies had no formal processes in place for identifying and sharing their supply chain best practices.
Evidently, some chemical companies have work to do before they can say that they have adopted supply chain best practices. That's a major finding of a study by the consulting firm Accenture, which surveyed 400 supply chain professionals at 150 chemical businesses in Europe, North America, South America, the Middle East, and Asia. Nearly two-thirds of those survey respondents said their companies had no formal processes in place for identifying and sharing their supply chain best practices.
Not only do those companies lack formal procedures for sharing information, only 11 percent of survey respondents said that best practices are documented, translated into standard operating procedures, and measured at their companies. Even worse, only 4 percent said their companies have collected information about best practices in a single place and made them available to all supply chain professionals within their organizations.
Companies would be better off if they shared best practices, said Christopher Lange, study author and senior executive in Accenture's Chemicals Practice, in a statement announcing the study's results. "While companies have traditionally looked at the supply chain as a way to cut costs, they now look at it as a strategic and financially important part of the business and a way to generate value and revenue," he said. "In a competitive global landscape, sharing best practices will be critical to increasing performance."
On a positive note, the 2007 study did indicate that supply chain professionals at chemical companies are doing better at collaborating and communicating with customers than they were two years ago, when a similar survey was conducted. In fact, the researchers learned that the percentage of supply chain professionals who said they collaborate and communicate with customers to make sales forecasts has more than tripled in the past two years, from just 7 percent in 2005 to 24 percent in 2007.
Even though the study indicated that supply chain education is more prevalent across the chemicals industry today than it was two years ago, most professionals do not think they are getting enough training. The number of respondents who received no training at all decreased significantly, from 78 percent in 2005 to just 11 percent this year, but only 29 percent said they were satisfied with their current level of professional education.
Lange emphasized that education is essential to driving further supply chain improvements. "Companies have invested in improving their supply chains, but if their training is ineffective or informal, their professionals will lack the high level of knowledge and skills needed to drive value and sustain the changes they're looking for," he said. "Training is important because it enables supply chain professionals to examine their company's practices and performance and identify opportunities for improvement."
[Source: "2007 Global Chemical Industry Best Practices Study and Assessment," Accenture, www.scmstudies.com]
Businesses engaged in international trade face three major supply chain hurdles as they head into 2025: the disruptions caused by Chinese New Year (CNY), the looming threat of potential tariffs on foreign-made products that could be imposed by the incoming Trump Administration, and the unresolved contract negotiations between the International Longshoremen’s Association (ILA) and the U.S. Maritime Alliance (USMX), according to an analysis from trucking and logistics provider Averitt.
Each of those factors could lead to significant shipping delays, production slowdowns, and increased costs, Averitt said.
First, Chinese New Year 2025 begins on January 29, prompting factories across China and other regions to shut down for weeks, typically causing production to halt and freight demand to skyrocket. The ripple effects can range from increased shipping costs to extended lead times, disrupting even the most well-planned operations. To prepare for that event, shippers should place orders early, build inventory buffers, secure freight space in advance, diversify shipping modes, and communicate with logistics providers, Averitt said.
Second, new or increased tariffs on foreign-made goods could drive up the cost of imports, disrupt established supply chains, and create uncertainty in the marketplace. In turn, shippers may face freight rate volatility and capacity constraints as businesses rush to stockpile inventory ahead of tariff deadlines. To navigate these challenges, shippers should prepare advance shipments and inventory stockpiling, diversity sourcing, negotiate supplier agreements, explore domestic production, and leverage financial strategies.
Third, unresolved contract negotiations between the ILA and the USMX will come to a head by January 15, when the current contract expires. Labor action or strikes could cause severe disruptions at East and Gulf Coast ports, triggering widespread delays and bottlenecks across the supply chain. To prepare for the worst, shippers should adopt a similar strategy to the other potential January threats: collaborate early, secure freight, diversify supply chains, and monitor policy changes.
According to Averitt, companies can cushion the impact of all three challenges by deploying a seamless, end-to-end solution covering the entire path from customs clearance to final-mile delivery. That strategy can help businesses to store inventory closer to their customers, mitigate delays, and reduce costs associated with supply chain disruptions. And combined with proactive communication and real-time visibility tools, the approach allows companies to maintain control and keep their supply chains resilient in the face of global uncertainties, Averitt said.
Specifically, the new global average robot density has reached a record 162 units per 10,000 employees in 2023, which is more than double the mark of 74 units measured seven years ago.
Broken into geographical regions, the European Union has a robot density of 219 units per 10,000 employees, an increase of 5.2%, with Germany, Sweden, Denmark and Slovenia in the global top ten. Next, North America’s robot density is 197 units per 10,000 employees – up 4.2%. And Asia has a robot density of 182 units per 10,000 persons employed in manufacturing - an increase of 7.6%. The economies of Korea, Singapore, mainland China and Japan are among the top ten most automated countries.
Broken into individual countries, the U.S. ranked in 10th place in 2023, with a robot density of 295 units. Higher up on the list, the top five are:
The Republic of Korea, with 1,012 robot units, showing a 5% increase on average each year since 2018 thanks to its strong electronics and automotive industries.
Singapore had 770 robot units, in part because it is a small country with a very low number of employees in the manufacturing industry, so it can reach a high robot density with a relatively small operational stock.
China took third place in 2023, surpassing Germany and Japan with a mark of 470 robot units as the nation has managed to double its robot density within four years.
Germany ranks fourth with 429 robot units for a 5% CAGR since 2018.
Japan is in fifth place with 419 robot units, showing growth of 7% on average each year from 2018 to 2023.
Progress in generative AI (GenAI) is poised to impact business procurement processes through advancements in three areas—agentic reasoning, multimodality, and AI agents—according to Gartner Inc.
Those functions will redefine how procurement operates and significantly impact the agendas of chief procurement officers (CPOs). And 72% of procurement leaders are already prioritizing the integration of GenAI into their strategies, thus highlighting the recognition of its potential to drive significant improvements in efficiency and effectiveness, Gartner found in a survey conducted in July, 2024, with 258 global respondents.
Gartner defined the new functions as follows:
Agentic reasoning in GenAI allows for advanced decision-making processes that mimic human-like cognition. This capability will enable procurement functions to leverage GenAI to analyze complex scenarios and make informed decisions with greater accuracy and speed.
Multimodality refers to the ability of GenAI to process and integrate multiple forms of data, such as text, images, and audio. This will make GenAI more intuitively consumable to users and enhance procurement's ability to gather and analyze diverse information sources, leading to more comprehensive insights and better-informed strategies.
AI agents are autonomous systems that can perform tasks and make decisions on behalf of human operators. In procurement, these agents will automate procurement tasks and activities, freeing up human resources to focus on strategic initiatives, complex problem-solving and edge cases.
As CPOs look to maximize the value of GenAI in procurement, the study recommended three starting points: double down on data governance, develop and incorporate privacy standards into contracts, and increase procurement thresholds.
“These advancements will usher procurement into an era where the distance between ideas, insights, and actions will shorten rapidly,” Ryan Polk, senior director analyst in Gartner’s Supply Chain practice, said in a release. "Procurement leaders who build their foundation now through a focus on data quality, privacy and risk management have the potential to reap new levels of productivity and strategic value from the technology."
Businesses are cautiously optimistic as peak holiday shipping season draws near, with many anticipating year-over-year sales increases as they continue to battle challenging supply chain conditions.
That’s according to the DHL 2024 Peak Season Shipping Survey, released today by express shipping service provider DHL Express U.S. The company surveyed small and medium-sized enterprises (SMEs) to gauge their holiday business outlook compared to last year and found that a mix of optimism and “strategic caution” prevail ahead of this year’s peak.
Nearly half (48%) of the SMEs surveyed said they expect higher holiday sales compared to 2023, while 44% said they expect sales to remain on par with last year, and just 8% said they foresee a decline. Respondents said the main challenges to hitting those goals are supply chain problems (35%), inflation and fluctuating consumer demand (34%), staffing (16%), and inventory challenges (14%).
But respondents said they have strategies in place to tackle those issues. Many said they began preparing for holiday season earlier this year—with 45% saying they started planning in Q2 or earlier, up from 39% last year. Other strategies include expanding into international markets (35%) and leveraging holiday discounts (32%).
Sixty percent of respondents said they will prioritize personalized customer service as a way to enhance customer interactions and loyalty this year. Still others said they will invest in enhanced web and mobile experiences (23%) and eco-friendly practices (13%) to draw customers this holiday season.
The practice consists of 5,000 professionals from Accenture and from Avanade—the consulting firm’s joint venture with Microsoft. They will be supported by Microsoft product specialists who will work closely with the Accenture Center for Advanced AI. Together, that group will collaborate on AI and Copilot agent templates, extensions, plugins, and connectors to help organizations leverage their data and gen AI to reduce costs, improve efficiencies and drive growth, they said on Thursday.
Accenture and Avanade say they have already developed some AI tools for these applications. For example, a supplier discovery and risk agent can deliver real-time market insights, agile supply chain responses, and better vendor selection, which could result in up to 15% cost savings. And a procure-to-pay agent could improve efficiency by up to 40% and enhance vendor relations and satisfaction by addressing urgent payment requirements and avoiding disruptions of key services
Likewise, they have also built solutions for clients using Microsoft 365 Copilot technology. For example, they have created Copilots for a variety of industries and functions including finance, manufacturing, supply chain, retail, and consumer goods and healthcare.
Another part of the new practice will be educating clients how to use the technology, using an “Azure Generative AI Engineer Nanodegree program” to teach users how to design, build, and operationalize AI-driven applications on Azure, Microsoft’s cloud computing platform. The online classes will teach learners how to use AI models to solve real-world problems through automation, data insights, and generative AI solutions, the firms said.
“We are pleased to deepen our collaboration with Accenture to help our mutual customers develop AI-first business processes responsibly and securely, while helping them drive market differentiation,” Judson Althoff, executive vice president and chief commercial officer at Microsoft, said in a release. “By bringing together Copilots and human ambition, paired with the autonomous capabilities of an agent, we can accelerate AI transformation for organizations across industries and help them realize successful business outcomes through pragmatic innovation.”