Imports at the nation's major retail container ports have dipped from last fall's frantic peaks, but still remain at higher-than-usual levels because retailers are stockpiling inventory as they brace for the impact of potential March tariff hikes on goods from China, according to the latest monthly cargo data from the National Retail Federation (NRF) and maritime consultants Hackett Associates.
Current U.S. tariff rates of 10 percent on $200 billion worth of Chinese goods that first took effect last September are scheduled to jump to 25 percent on March 1 unless ongoing negotiations are successful, NRF said.
A tariff hike of that magnitude would trigger higher prices for consumers at the checkout counter, and put a dent in global trade, the group said. In preparation, retailers are scurrying to squirrel away goods, but warehouses and storage facilities are running out of space to store that flood of last-minute imports, according to Hackett Associates Founder Ben Hackett.
"With trade talks with China still unresolved, retailers appear to be bringing spring merchandise into the country early in case tariffs go up in March," NRF Vice President for Supply Chain and Customs Policy Jonathan Gold said in a release. "We are hopeful that the talks will succeed, but until the trade war is behind us, retailers need to do what they can to mitigate the higher prices that will inevitably come with tariffs."
The latest figures are higher than NRF and Hackett had forecast in their January report, when they projected declining volumes in the coming months and an overall weakness in imports for the first half of 2019.
The statistics shows that U.S. ports covered by Hackett's Global Port Tracker handled 1.97 million twenty-foot equivalent units (TEU) in December, the latest month for which after-the-fact numbers are available. That was up 8.8 percent from November and 13.9 percent year-over-year.
For the full year, that result brought 2018 to a record 21.8 million TEU, an increase of 6.2 percent over 2017's previous record of 20.5 million TEU.
Looking forward into 2019, January was estimated at 1.83 million TEU, up 4.1 percent from January 2018. February is forecast at 1.78 million TEU, up 5.7 percent year-over-year; March at 1.6 million TEU, up 3.8 percent; April at 1.76 million TEU, up 7.7 percent; May at 1.89 million TEU, up 3.4 percent, and June at 1.86 million TEU, up 0.3 percent. That would bring the first half of 2019 to 10.7 million TEU, up 4.1 percent over the first half of 2018.
The Global Port Tracker report, which is produced for NRF by Hackett, covers the ports of Los Angeles/Long Beach, Oakland, Seattle and Tacoma on the West Coast; New York/New Jersey, Port of Virginia, Charleston, Savannah, Port Everglades, Miami and Jacksonville on the East Coast, and Houston on the Gulf Coast.
Know someone who is making a difference in the world of logistics? Then consider nominating that person as one of DC Velocity’s “Rainmakers”—professionals from all facets of the business whose achievements set them apart from the crowd. In the past, they have included practitioners, consultants, academics, vendors, and even military commanders.
To identify these achievers, DC Velocity’s editorial directors work with members of the magazine’s Editorial Advisory Board. The nomination process begins in January and concludes in April with a vote to determine which nominees will be invited to become Rainmakers.
It’s getting a little easier to find warehouse space in the U.S., as the frantic construction pace of recent years declined to pre-pandemic levels in the fourth quarter of 2024, in line with rising vacancies, according to a report from real estate firm Colliers.
Those trends played out as the gap between new building supply and tenants’ demand narrowed during 2024, the firm said in its “U.S. Industrial Market Outlook Report / Q4 2024.” By the numbers, developers delivered 400 million square feet for the year, 34% below the record 607 million square feet completed in 2023. And net absorption, a key measure of demand, declined by 27%, to 168 million square feet.
Consequently, the U.S. industrial vacancy rate rose by 126 basis points, to 6.8%, as construction activity normalized at year-end to pre-pandemic levels of below 300 million square feet. With supply and demand nearing equilibrium in 2025, the vacancy rate is expected to peak at around 7% before starting to fall again.
Thanks to those market conditions, renters of warehouse space should begin to see some relief from the steep rent hikes they’re seen in recent years. According to Colliers, rent growth decelerated in 2024 after nine consecutive quarters of year-over-year increases surpassing 10%. Average warehouse and distribution rents rose by 5% to $10.12/SF triple net, and rents in some markets actually declined following a period of unprecedented growth when increases often exceeded 25% year-over-year. As the market adjusts, rents are projected to stabilize in 2025, rising between 2% and 5%, in line with historical averages.
In 2024, there were 125 new occupancies of 500,000 square feet or more, led by third-party logistics (3PL) providers, followed by manufacturing companies. Demand peaked in the fourth quarter at 53 million square feet, while the first quarter had the lowest activity at 28 million square feet — the lowest quarterly tally since 2012.
In its economic outlook for the future, Colliers said the U.S. economy remains strong by most measures; with low unemployment, consumer spending surpassing expectations, positive GDP growth, and signs of improvement in manufacturing. However businesses still face challenges including persistent inflation, the lowest hiring rate since 2010, and uncertainties surrounding tariffs, migration, and policies introduced by the new Trump Administration.
As U.S. businesses count down the days until the expiration of the Trump Administration’s monthlong pause of tariffs on Canada and Mexico, a report from Uber Freight says the tariffs will likely be avoided through an extended agreement, since the potential for damaging consequences would be so severe for all parties.
If the tariffs occurred, they could push U.S. inflation higher, adding $1,000 to $1,200 to the average person's cost of living. And relief from interest rates would likely not come to the rescue, since inflation is already above the Fed's target, delaying further rate cuts.
A potential impact of the tariffs in the long run might be to boost domestic freight by giving local manufacturers an edge. However, the magnitude and sudden implementation of these tariffs means we likely won't see such benefits for a while, and the immediate damage will be more significant in the meantime, Uber Freight said in its “2025 Q1 Market update & outlook.”
That market volatility comes even as tough times continue in the freight market. In the U.S. full truckload sector, the cost per loaded mile currently exceeds spot rates significantly, which will likely push rate increases.
However, in the first quarter of 2025, spot rates are now falling, as they usually do in February following the winter peak. According to Uber Freight, this situation arose after truck operating costs rose 2 cents/mile in 2023 despite a 9-cent diesel price decline, thanks to increases in insurance (+13%), truck and trailer costs (+9%), and driver wages (+8%). Costs then fell 2 cents/mile in 2024, resulting in stable costs over the past two years.
Fortunately, Uber Freight predicts that the freight cycle could soon begin to turn, as signs of a recovery are emerging despite weak current demand. A measure of manufacturing growth called the ISM PMI edged up to 50.9 in December, surpassing the expansion threshold for the first time in 26 months.
Accordingly, new orders and production increased while employment stabilized. That means the U.S. manufacturing economy appears to be expanding after a prolonged period of contraction, signaling a positive outlook for freight demand, Uber Freight said.
The surge comes as the U.S. imposed a new 10% tariff on Chinese goods as of February 4, while pausing a more aggressive 25% tariffs on imports from Mexico and Canada until March, Descartes said in its “February Global Shipping Report.”
So far, ports are handling the surge well, with overall port transit time delays not significantly lengthening at the top 10 U.S. ports, despite elevated volumes for a seventh consecutive month. But the future may look more cloudy; businesses with global supply chains are coping with heightened uncertainty as they eye the new U.S. tariffs on China, continuing trade policy tensions, and ongoing geopolitical instability in the Middle East, Descartes said.
“The impact of new and potential tariffs, coupled with a late Chinese Lunar New Year (January 29 – February 12), may have contributed to higher U.S. container imports in January,” Jackson Wood, Director, Industry Strategy at Descartes, said in a release. “These trade policy developments add significant uncertainty to global supply chains, increasing concerns about rising import costs and supply chain disruptions. As trade tensions escalate, businesses and consumers alike may face the risk of higher prices and prolonged market volatility.”
New York-based Cofactr will now integrate Factor.io’s capabilities into its unified platform, a supply chain and logistics management tool that streamlines production, processes, and policies for critical hardware manufacturers. The combined platform will give users complete visibility into the status of every part in their Bill of Materials (BOM), across the end-to-end direct material management process, the firm said.
Those capabilities are particularly crucial for Cofactr’s core customer base, which include manufacturers in high-compliance, highly regulated sectors such as defense, aerospace, robotics, and medtech.
“Whether an organization is supplying U.S. government agencies with critical hardware or working to meet ambitious product goals in an emerging space, they’re all looking for new ways to optimize old processes that stand between them and their need to iterate at breakneck speeds,” Matthew Haber, CEO and Co-founder of Cofactr, said in a release. “Through this acquisition, we’re giving them another way to do that with acute visibility into their full bill of materials across the many suppliers they work with, directly through our platform.”
“Poor data quality in the supply chain has always been a root cause of delays that create unnecessary costs and interfere with an organization’s speed to market. For manufacturers, especially those in regulated industries, manually cross-checking hundreds of supplier communications against ERP information while navigating other complex processes and policies is a recipe for disaster,” Shultz said. “With Cofactr, we’re now working with the best in the industry to scale our ability to eliminate time-consuming tasks and increase process efficiencies so manufacturers can instead focus on building their products.”