The numbers show that global supply chains are coping with the ongoing Houthi rebel attacks on commercial vessels in the Red Sea by following new routes, Hackett Associates Founder Ben Hackett said in a release.
The initial surge in shipping prices and delays is now subsiding, as carriers are avoiding the Red Sea by sailing around Africa’s Cape of Good Hope, shifting cargo from Atlantic to Pacific lanes, or transiting the Panama Canal, he said.
“Despite the shipping disruptions cause by Houthi rebels in the Red Sea, the global trade of consumer goods, industrial materials, and bulk commodities continues to flow relatively smoothly,” Hackett said. “Fear of an inflationary impact due to the raised cost of transportation should be alleviated by now. Retailers and their carrier partners are adjusting to the re-routings and new schedules, which add new costs but those can be partially offset by not having to sail up the Red Sea and not having to pay Suez Canal transit costs. This will continue until there is a resolution and freedom of navigation through the Red Sea and Suez Canal.”
U.S. ports covered by the “Global Port Tracker” report handled 1.96 million twenty-foot equivalent units (TEUs) in January, the latest month for which final numbers are available. That was up 4.7% from December and up 8.6% year over year. Based on forecasts, the first half of 2024 is now expected to total 11.5 million TEU, up 7.8% from the same period last year. Imports during 2023 totaled 22.3 million TEU, down 12.8% from 2022.
Global Port Tracker, which is produced for NRF by Hackett Associates, provides historical data and forecasts for the U.S. ports of Los Angeles/Long Beach, Oakland, Seattle and Tacoma on the West Coast; New York/New Jersey, Port of Virginia, Charleston, Savannah, Port Everglades, Miami and Jacksonville on the East Coast, and Houston on the Gulf Coast.
Generative AI (GenAI) is being deployed by 72% of supply chain organizations, but most are experiencing just middling results for productivity and ROI, according to a survey by Gartner, Inc.
That’s because productivity gains from the use of GenAI for individual, desk-based workers are not translating to greater team-level productivity. Additionally, the deployment of GenAI tools is increasing anxiety among many employees, providing a dampening effect on their productivity, Gartner found.
To solve those problems, chief supply chain officers (CSCOs) deploying GenAI need to shift from a sole focus on efficiency to a strategy that incorporates full organizational productivity. This strategy must better incorporate frontline workers, assuage growing employee anxieties from the use of GenAI tools, and focus on use-cases that promote creativity and innovation, rather than only on saving time.
"Early GenAI deployments within supply chain reveal a productivity paradox," Sam Berndt, Senior Director in Gartner’s Supply Chain practice, said in the report. "While its use has enhanced individual productivity for desk-based roles, these gains are not cascading through the rest of the function and are actually making the overall working environment worse for many employees. CSCOs need to retool their deployment strategies to address these negative outcomes.”
As part of the research, Gartner surveyed 265 global respondents in August 2024 to assess the impact of GenAI in supply chain organizations. In addition to the survey, Gartner conducted 75 qualitative interviews with supply chain leaders to gain deeper insights into the deployment and impact of GenAI on productivity, ROI, and employee experience, focusing on both desk-based and frontline workers.
Gartner’s data showed an increase in productivity from GenAI for desk-based workers, with GenAI tools saving 4.11 hours of time weekly for these employees. The time saved also correlated to increased output and higher quality work. However, these gains decreased when assessing team-level productivity. The amount of time saved declined to 1.5 hours per team member weekly, and there was no correlation to either improved output or higher quality of work.
Additional negative organizational impacts of GenAI deployments include:
Frontline workers have failed to make similar productivity gains as their desk-based counterparts, despite recording a similar amount of time savings from the use of GenAI tools.
Employees report higher levels of anxiety as they are exposed to a growing number of GenAI tools at work, with the average supply chain employee now utilizing 3.6 GenAI tools on average.
Higher anxiety among employees correlates to lower levels of overall productivity.
“In their pursuit of efficiency and time savings, CSCOs may be inadvertently creating a productivity ‘doom loop,’ whereby they continuously pilot new GenAI tools, increasing employee anxiety, which leads to lower levels of productivity,” said Berndt. “Rather than introducing even more GenAI tools into the work environment, CSCOs need to reexamine their overall strategy.”
According to Gartner, three ways to better boost organizational productivity through GenAI are: find creativity-based GenAI use cases to unlock benefits beyond mere time savings; train employees how to make use of the time they are saving from the use GenAI tools; and shift the focus from measuring automation to measuring innovation.
Business software vendor Cleo has acquired DataTrans Solutions, a cloud-based procurement automation and EDI solutions provider, saying the move enhances Cleo’s supply chain orchestration with new procurement automation capabilities.
According to Chicago-based Cleo, the acquisition comes as companies increasingly look to digitalize their procurement processes, instead of relying on inefficient and expensive manual approaches.
By buying Texas-based DataTrans, Cleo said it will gain an expanded ability to help businesses streamline procurement, optimize working capital, and strengthen supplier relationships. Specifically, by integrating DTS’s procurement automation capabilities, Cleo will be able to provide businesses with solutions including: a supplier EDI & testing portal; web EDI & PDF digitization; and supplier scorecarding & performance tracking.
“Cleo’s vision is to deliver true supply chain orchestration by bridging the gap between planning and execution,” Cleo President and CEO Mahesh Rajasekharan said in a release. “With DTS’s technology embedded into CIC, we’re empowering procurement teams to reduce costs, improve efficiency, and minimize supply chain risks—all through automation.”
And many of them will have a budget to do it, since 51% of supply chain professionals with existing innovation budgets saw an increase earmarked for 2025, suggesting an even greater emphasis on investing in new technologies to meet rising demand, Kenco said in its “2025 Supply Chain Innovation” survey.
One of the biggest targets for innovation spending will artificial intelligence, as supply chain leaders look to use AI to automate time-consuming tasks. The survey showed that 41% are making AI a key part of their innovation strategy, with a third already leveraging it for data visibility, 29% for quality control, and 26% for labor optimization.
Still, lingering concerns around how to effectively and securely implement AI are leading some companies to sidestep the technology altogether. More than a third – 35% – said they’re largely prevented from using AI because of company policy, leaving an opportunity to streamline operations on the table.
“Avoiding AI entirely is no longer an option. Implementing it strategically can give supply chain-focused companies a serious competitive advantage,” Kristi Montgomery, Vice President, Innovation, Research & Development at Kenco, said in a release. “Now’s the time for organizations to explore and experiment with the tech, especially for automating data-heavy operations such as demand planning, shipping, and receiving to optimize your operations and unlock true efficiency.”
Among the survey’s other top findings:
there was essentially three-way tie for which physical automation tools professionals are looking to adopt in the coming year: robotics (43%), sensors and automatic identification (40%), and 3D printing (40%).
professionals tend to select a proven developer for providing supply chain innovation, but many also pick start-ups. Forty-five percent said they work with a mix of new and established developers, compared to 39% who work with established technologies only.
there’s room to grow in partnering with 3PLs for innovation: only 13% said their 3PL identified a need for innovation, and just 8% partnered with a 3PL to bring a technology to life.
Even as a last-minute deal today appeared to delay the tariff on Mexico, that deal is set to last only one month, and tariffs on the other two countries are still set to go into effect at midnight tonight.
Once new U.S. tariffs go into effect, those other countries are widely expected to respond with retaliatory tariffs of their own on U.S. exports, that would reduce demand for U.S. and manufacturing goods. In the context of that unpredictable business landscape, many U.S. business groups have been pressuring the White House to pull back from the new policy.
Here is a sampling of the reaction to the tariff plan by the U.S. business community:
American Association of Port Authorities (AAPA)
“Tariffs are taxes,” AAPA President and CEO Cary Davis said in a release. “Though the port industry supports President Trump’s efforts to combat the flow of illicit drugs, tariffs will slow down our supply chains, tax American businesses, and increase costs for hard-working citizens. Instead, we call on the Administration and Congress to thoughtfully pursue alternatives to achieving these policy goals and exempt items critical to national security from tariffs, including port equipment.”
Retail Industry Leaders Association (RILA)
“We understand the president is working toward an agreement. The leaders of all four nations should come together and work to reach a deal before Feb. 4 because enacting broad-based tariffs will be disruptive to the U.S. economy,” Michael Hanson, RILA’s Senior Executive Vice President of Public Affairs, said in a release. “The American people are counting on President Trump to grow the U.S. economy and lower inflation, and broad-based tariffs will put that at risk.”
National Association of Manufacturers (NAM)
“Manufacturers understand the need to deal with any sort of crisis that involves illicit drugs crossing our border, and we hope the three countries can come together quickly to confront this challenge,” NAM President and CEO Jay Timmons said in a release. “However, with essential tax reforms left on the cutting room floor by the last Congress and the Biden administration, manufacturers are already facing mounting cost pressures. A 25% tariff on Canada and Mexico threatens to upend the very supply chains that have made U.S. manufacturing more competitive globally. The ripple effects will be severe, particularly for small and medium-sized manufacturers that lack the flexibility and capital to rapidly find alternative suppliers or absorb skyrocketing energy costs. These businesses—employing millions of American workers—will face significant disruptions. Ultimately, manufacturers will bear the brunt of these tariffs, undermining our ability to sell our products at a competitive price and putting American jobs at risk.”
American Apparel & Footwear Association (AAFA)
“Widespread tariff actions on Mexico, Canada, and China announced this evening will inject massive costs into our inflation-weary economy while exposing us to a damaging tit-for-tat tariff war that will harm key export markets that U.S. farmers and manufacturers need,” Steve Lamar, AAFA’s president and CEO, said in a release. “We should be forging deeper collaboration with our free trade agreement partners, not taking actions that call into question the very foundation of that partnership."
Healthcare Distribution Alliance (HDA)
“We are concerned that placing tariffs on generic drug products produced outside the U.S. will put additional pressure on an industry that is already experiencing financial distress. Distributors and generic manufacturers and cannot absorb the rising costs of broad tariffs. It is worth noting that distributors operate on low profit margins — 0.3 percent. As a result, the U.S. will likely see new and worsened shortages of important medications and the costs will be passed down to payers and patients, including those in the Medicare and Medicaid programs,” the group said in a statement.
National Retail Federation (NRF)
“We support the Trump administration’s goal of strengthening trade relationships and creating fair and favorable terms for America,” NRF Executive Vice President of Government Relations David French said in a release. “But imposing steep tariffs on three of our closest trading partners is a serious step. We strongly encourage all parties to continue negotiating to find solutions that will strengthen trade relationships and avoid shifting the costs of shared policy failures onto the backs of American families, workers and small businesses.”
In a statement, DCA airport officials said they would open the facility again today for flights after planes were grounded for more than 12 hours. “Reagan National airport will resume flight operations at 11:00am. All airport roads and terminals are open. Some flights have been delayed or cancelled, so passengers are encouraged to check with their airline for specific flight information,” the facility said in a social media post.
An investigation into the cause of the crash is now underway, being led by the National Transportation Safety Board (NTSB) and assisted by the Federal Aviation Administration (FAA). Neither agency had released additional information yet today.
First responders say nearly 70 people may have died in the crash, including all 60 passengers and four crew on the American Airlines flight and three soldiers in the military helicopter after both aircraft appeared to explode upon impact and fall into the Potomac River.
Editor's note:This article was revised on February 3.